Hydrogen Oxygen Generator No Pollution Automatic Wire Welding Machine

• Customization: Available
• Type: Flame
• Control Mode: CNC
• Model NO.: 3500
• Voltage: AC380V, as Per Custumer Requirement
• Certification: ISO9001, CE
• Noise Level: Low
• Purity: <90.0%
• After-Sales Service: After Sales Service on Line
• Warranty: 1 Year
• Feature 1: Energy Saving
• Feature 2: No Pollution to Environment
• Feature 3: Safe
• Exhaust Material: Pure Water
• Transport Package: Wooden Pallet + Carton Box
• Specification: 1360*860*1500mm
• Trademark: torch
• Origin: China
• HS Code: 840510
• Production Capacity: 100set / Month

Product Description

Hydrogen Oxygen Generator (model 3500)


A 1.1 Application: 
 IT is mainly used for the cooper welding, plate cutting, waste materal burning assistance etc.

It exhausts the pure water and electricty in daily running.

It has not high pressure storage gas tank, the produced gas will be used immediately and with the max set pressure to be 0.2MPA. so low risk for running.

A2.1 Parameter information: 
A2.1.1 Gas Production: the gas output of the machine. You could set the gas output From 0 - 3500L per Hour by "Gas Adjustment Knob"
A2.1.2 Running time:  the execution times of the working automatically.
A2.1.3 Total Running times :  the total working time automatically.
A2.1.4 Working time:0:00:00 You could set at 8 Hours minutes in general, press & hold to change operation time. stop when the time arrives.
A2.2 OP1- Over voltage :
When the device pressure >= 0.2Mpa, indicator light turns Red and flashes, the device will stop producing gas.when the pressure <= 0.1Mpa. the red light resume Green and shop flashing, the device resumes gas production.
A2.3 OP2-Over pressure: Flashes when an unexpected tempering happen .
A2.4 PT-protection:When the pressure >= 0.2Mpa, the electrolytic cell stop producing gas,Automatic protection.
A2.5 OT-Over temperature:The Red light means the temperature of the electrolytic cell is too high and the device will stop producing gas and sounded an alarm at the same time. Generally caused by fan damage.
A2.6 Water of electrolytic cell: The amount of water electrolytic cell (Ref Item D3 ) 
A2.7 Wash tank : Wash tank 1 & Wash tank 2 (Ref Item A3.2 ) 
A2.8 Storage water tank:Automatically add water to the Electrolytic cell .(Ref Item D2)
A2.9 Key area
 There are 2 control buttons in the keypad.
"OK" :confirm or go to the next operation;
  "RST": stop the operation of the machine and the system is reinitialized.  

A3. Internal structure

It mainly includes generators, anti-tempering devices, power systems, axial fans, water tanks, automatic dosing devices, and circuit control systems.




A3.1 HHO generator ( 25% KOH Electrolysis liquid )



A3.2 Anti-tempering tank = ( Wash tank )



A3.3 Power System


A3.4 Axial Fan                              
      

A3.5 Circuit control


A3.6 Storage water tank ---Automatic water feeding device


Storage water tank:
Adding the pure water by "Manual water inlet",If there is less water in Electrolytic cell,the "Water adding pump" open automatically,then the water to the Electrolytic cell.
 

A4. Technical Parameters

Voltage	Three phase 415V 3 Fire line, 1 ground line
Max.Gas output	3500L/h
Rated Power	11 KW/h
Max.Working Pressure	0.2mpa
Max. Water Consumption	1.8 L/h
Water Feed	auto
Ventilation Space Requirement	400mm in each direction
size( L*W*H)mm	1150*780*1300
liquid	25% KOH + Purified water
Net weight	360KG